visa.gif (1547 bytes) hms_logo.gif (2942 bytes) visa.gif (1547 bytes)

Summit Systems Slot Machine Parts. We only support Bally Machines that were converted by Summit Systems Inc. Please inquire about Summit Systems Slot Machine Parts. We do not support any other machine types at this time.  If you call looking for telephone support,  I have to cover my time.  It will be necessary to obtain credit card  info to cover my time.  $40 for the first 15 minutes, $2 for each minute thereafter.
Note: Can do repairs or restoration on 'antique' slot machines including Mills, Jennings (mechanical or electronic), some others (make inquiry).  No 'Foreign' Slot Machines. 


HMS Electronics offers the following new & used parts for Summit Systems slot machines. *Pictures*

Item#

Description

Price 1-9 (10 or more apply 10% discount)
150131B Slot Controller Board (no yellow pull handle) [New] Pictures $178.50
150326B Interface Board (no red pull handle) [New] Pictures $135.00
150131EXT Slot Controller Extender Board $45.00
150326EXT Interface Extender Board $40.00
120274B Power Supply New (with Run & Logic Power Indicators) $139.00
150311 Hopper Control board (Used-Tested) Pictures $65.00
150432 Sound Interface Board (3 reed relays) Pictures $45.00
150055 Main Backplane (for all the boards & Power Supply) (Form/fit to be determined on order) $89.50
150049 3 Digit Panel Meter Pictures $22.50
CGS-3R **3 REEL Game Software (custom for each machine)  Requires filling out the reel table forms (Reel Table Setup). Link to relay on Door Picture   Link to 'X' to detector alignment picture       $75.00
CGS-4R **4 REEL Game Software (custom for each machine)  Requires filling out the reel table forms (Reel Table Setup). Link to relay on Door Picture   Link to 'X' to detector alignment picture $85.00
CGS-5R **5 REEL Game Software (custom for each machine)  Requires filling out the reel table forms (Reel Table Setup). Link to relay on Door Picture   Link to 'X' to detector alignment picture $95.00
SD-1 Complete Input/Output Diagnostic Chip (install in place of game chip) Step by step instructions included. Test every Input & Output of the machine. $24.95
GTC-22 Game Test Chip.  For 22 stop machines.  The chip runs the game as if there are cherries on the first reel.  Every game play pays cherry win.  Use this game chip to verify the operation of your slot controller board. $14.95
GTC-25 Game Test Chip.  For 25 stop machines.  The chip runs the game as if there are cherries on the first reel.  Every game play pays cherry win.   Use this game chip to verify the operation of your slot controller board. $14.95
ILQ-74 Quad Opto Coupler (buffers switch signals) $22.00

Reel Assembly Plug and Socket sets (Gold Plated)

SP3330 30 Pin Plug and Socket for Reel Assembly $30.00
SP3324 24 Pin Plug and Socket for Reel Assembly $27.00
SP3318 18 Pin Plug and Socket for Hopper Assembly $24.00

 

Other Summit Parts *Pictures*

Item#

Description

Price 1-9 (10 or more apply 10% discount)
SM1 Summit Manual (operation, schematics, codes) $75.00
SM1-B Summit Manual (schematics only) $28.00
DET-1 Reel Detector (plugs into pc board) Pictures $28.00
3DETBP-N 3 Detector Back Plane with Cable (narrow body) $25.05
3DETBP-W 3 Detector Back Plane with Cable (wide body) $25.05
4DETBP-N 4 Detector Back Plane with Cable (narrow body) $28.95
MECH-25 25 Cent Coin Mechanism $20.95
MECH-5 5 Cent Coin Mechanism $20.95
28-I-120VAC Indexing Solenoid $32.00
CLKT-1 Coin Lockout Coil (under coin mechanism) $8.50
CDFC-1 Coin Defector Coil (holds back coin deflector) $12.50
HNDL-Coil Handle Release Coil $12.50
Hopper_SW Hopper Switch (see picture, some are different) $9.95
Coin_SW Coin in Switch (very sensitive and gold contact) 20.95
TL Tower Light (used, tested, w/connection list) 22.00
JPBL-1 Jack Pot Bell (6.3 VAC) $14.50
CA6 Coin Agitator, '6 Star' (for hopper) $9.50
Tumbler Lock Door Lock for Cabinet, 2 keys (no Cam) 180 $22.50
Lock Cam Door Lock Cam (usually missing on machines) $12.50
Lamps Link to Light Bulbs and Florescent Lamps  

 

Links to Summit Systems Slot Machine support and Game chip documenting

Summit Systems Slot Machine Support:
**CGS-X, for ordering software: (20-22-25 Stop) Reel Table Setup (PDF Document)

**Nearly every game machine has different symbol combinations, so the software has to be custom written for each machine as I have no reference to the Summit software part numbers.  For 4 and 5 reel machines, just fill out an additional sheet for the reels.

 

Ordering information

 

Last Updated: 03/12/2010