Roku Brightsign HD600 & HD2000 IO Board

w/Triac (12 inputs, 4 outputs+Triac for Lighting Control)

ROKU_GPT BOARD    

ROKU_GPT_240 (for 240 volt operation) 

Features:

• small footprint (4.0 x 4.0 inches)
• 4  Current Drivers
• Terminal blocks for all I/O connections
• Modes of operation selectable on board
• 6V, 12V or 24V operation (requires external power supply)
• on board LEDs to indicate Roku Power and Processor running.

Refer to the Schematic:

This board has a triac for turning on/off 120VAC (or 240VAC) line power to a load.  Plus it has drivers to drive up to 8 outputs plus the triac.  Maximum current is 8 amps for the traac circuit.  It is up to the user to make line and load connections and to prevent greater than 10 amps of current (external fuse should be used).

This board has No Agency Approvals.  It cannot be utilized where Agency Approvals are required (CSA, U.L., CE and such)

Updated: September 23, 2009