|
|
|
|
Roku Brightsign Developer Tools |
||
| Product | Description | Image (Click on image for larger image) |
| HD-GPIO (Development & Test board) Price Each $55 (USD)
|
8 on board button switches and 8 LED's to indicate state of 'Buttons'. Plus, 10 pin terminal block for external connections to button switches. | 
|
| DB15M-DB15F-LED Price Each $25 (USD)
|
DB15 Male to DB15 Female w/LED's for monitoring the GPIO port of the Brightsign. Insert in series with any interface board to have a visual on the I/O status. LED's light when the GPIO signals go low. | 
|
| DB15-TB10-LED
Price Each: $25 (USD) |
This Terminal Block interface board has LED's for visual monitoring of the GPIO signals. The LED's light when the GPIO signals go low. | 
|
| LED-8-OM
Price Each: $15 (USD) |
This LED 'Output Monitor' provides the developer with a quick and easy 'visual' way to verify programming. Connect this board to the HMS board and you will have a visual on the result of your programming. Can be used with 3.3v or 12V interface voltages. Note: Some I/O's on the HMS board are inverted, just bend the connection wires and rotate the board 180 to get proper orientation of the Output numbers. For 6 amp Terminal Blocks (black terminal blocks) | 
|
LED-8-OM-200 
Price Each: $17.50 (USD) |
LED 'Output Monitor' provides the developer with a quick and easy 'visual' way to verify programming. Connect this board to the HMS board and you will have a visual on the result of your programming. Can be used with 3.3v or 12V interface voltages. Steering Diodes to insure proper polarity. For 15 amp terminal blocks (green terminal blocks) | 
|
| LED-8-OM-8OUT
Price Each: $21.00 (USD) |
For use with 8-Out-Ser boards & HC-DRIVER-8 (REV 2B) only! Special spacing
for these high current boards boards. This LED 'Output Monitor' provides the developer with a quick and easy 'visual' way to verify programming. Connect this board to the HMS board and you will have a visual on the result of your programming. |
|
| LED-8-OM-24V
Price Each: $15 (USD) |
This LED 'Output Monitor' provides the developer with a quick and easy 'visual' way to verify programming. Connect this board to the HMS board and you will have a visual on the result of your programming. Can be used with 24V interface voltages. Note: Some I/O's on certain HMS boards are inverted. Just bend the connection wires backward and rotate the board 180 to get proper orientation of the Output numbers. |
|
| HMS-8Button-8LED 'Button Board'
Use with all ROKU-C-xxx 'HMS' interface boards Price Each $45 (USD)
|
8 Input Switches go directly to the BrightSign I/O port via the HMS interface board. Each Button activation pulls the BrightSign input low. I.E. Press Btn0 to pull the input 'Btn0' low to the Brightsign (event=btn0). An LED is connected to each 'Btn' so that programming or pressing a button can be viewed to assist in developing 'Play Files', 'AutoPlay Files' or 'Script Files'. | 
|
| RS232-TTL Port Adapter
Price Each: $65 (USD) |
RS232 to Roku BrightSign TTL Port Adapter. Reduce
development time for the more complex 'Command Structure' HMS Interface
boards. Work out the strings for controlling the RGBW and/or the
DMX512 interfaces using your computer! Use this board to use your computer to emulate the TTL port of the BrightSign. Using trial and error to get the control strings correct for the HMS Interface boards can be very time consuming. Verify the control strings or 'view' the data bytes sent from the Roku BrightSign on your computer Links: Schematic Specifications Sheet Links: Accessories & Power Supplies Terminal Program (on the web) |
|
Please inquire if you have a custom requirement for interfacing! Turn around can be a little as two weeks. Contact HMS Technical Support.
Updated: January 11, 2012