|
|
|
|
RGBW & DMX512 & HCA (High Current Adapter) Products |
||
Product |
Description |
Picture (Click Image for Larger Image) |
|
Price Each: $187.50 (USD)
|
16 input (buttons), 16 Output, With RGBW (4 color, 12 Volt, 15 amp) Driver
Board & DMX512 (3 terminal block for DMX connection), w/New Command
Selection Firmware for setting fade and fade rate for colors and 16 DMX
Channels. 200 DMX channels. 30
inch TTL cable included. Special Command for controlling DMX heads.
Links: Specification Sheet Schematic |
C-16 Board Stacked on RGBW Board |
C8-RGBW-DMX-1
Note: RGBW Daughter Board Included
Price Each: $182.50 (USD) |
8 input (buttons), 8 Output, With RGBW (4 color, 12 Volt, 15 amp) Driver
Board & DMX512 (3 terminal block for DMX connection), w/New Command
Selection Firmware for setting fade and fade rate for colors and 16DMX channels) and
more. 200 DMX Channels. The 30
inch TTL cable included. Special Command for controlling DMX heads.
Links: Specification Sheet Schematic |
C-16 Board Shown Stacked on RGBW Board |
|
C16-RGBW-DMX-2
Note: RGBW Daughter Board Included
Price Each: $190.50 (USD) (RGBW Board Included) |
16 input (buttons), 16 Output, With RGBW (4 color, 12 Volt, 15 amp) Driver
Board & DMX512 (XLR Connector for DMX connection), w/New Command
Selection Firmware for setting fade and fade rate for colors and 16 DMX channels) and
more. 200 DMX Channels. The 30
inch TTL cable included. Special Command for controlling DMX heads
Links: Specification Sheet Schematic |
C-16 Board Stacked on RGBW Board |
|
C8-RGBW-DMX-2
Note: RGBW Daughter Board Included
Price Each: $185.50 (USD) (RGBW Board Included) |
8 input (buttons), 8 Output, With RGBW (4 color, 12 Volt, 15 amp) Driver
Board & DMX512 (XLR Connector for DMX connection), w/New Command
Selection Firmware for setting fade and fade rate for colors and 16 DMX channels) and
more. 200 DMX Channels. The 30
inch TTL cable included. Special Command for controlling DMX heads
Links: Specification Sheet Schematic |
C-16 Board Shown Stacked on RGBW Board |
|
C16-RGBW Note: RGBW
Daughter Board Included
Price Each: $172.50 (USD) (RGBW Board Included) |
16 input (buttons), 16 Output, With RGBW (4 color, 12 Volt, 15 amp) Driver
Board (No DMX), w/New Command Selection Firmware for setting color fade speed.
30 inch TTL cable included.
Links: Specification Sheet Schematic |
 |
|
C8-RGBW Note:
RGBW Daughter Board Included
Price Each: $167.50 (USD) (RGBW Board Included) |
8 input (buttons), 8 Output, With RGBW (4 color, 12 Volt, 15 amp) Driver
Board (No DMX), w/New Command Selection Firmware for setting color fade speed.
30 inch TTL cable included.
Links: Specification Sheet Schematic |
C-16 Board Shown Stacked on RGBW Board |
|
HMS-C16-DMX-1
Note: Terminal Block for DMX
Price Each: $155.50 (USD) |
16 input (buttons), 16 Output, & DMX512 (3 terminal block
for DMX connection), w/New Command Selection Firmware for setting fade
speed for 16 DMX channels. 200 DMX Channels. The 30 inch TTL cable included. Special
Command for controlling DMX heads.
Links: Specification Sheet Schematic |
 |
|
HMS-C8-DMX-1
Note: Terminal Block for DMX
Price Each: $150.50 (USD) |
8 input (buttons), 8 Output, & DMX (3 terminal block for DMX
connection), w/New Command Selection Firmware for setting DMX fade
speed for 16 channels. 200 DMX Channels. The 30 inch TTL cable included. Special
Command for controlling DMX heads.
Links: Specification Sheet Schematic |
 |
|
Price Each: $160.50 (USD) |
16 input (buttons), 16 Output, & DMX512 (XLR Connector for DMX
connection), w/New Command Selection Firmware for setting fade speed for 16
DMX channels. 200 DMX Channels. The 30 inch TTL cable included. Special Command for
controlling DMX heads.
Links: Specification Sheet Schematic |
 |
|
HMS-C8-DMX-2
Note: XLR
Connector for DMX
Price Each: $155.50 (USD) |
8 input (buttons), 8 Output, & DMX (XLR Connector for DMX
connection), w/New Command Selection Firmware for setting DMX fade speed for
16 channels. 200 DMX Channels. The 30 inch TTL cable included. Special Command for
controlling DMX heads.
Links: Specification Sheet Schematic |
 |
|
Price Each: $198.95 (USD) |
16 input (buttons), 24 Output (8 High Current Outputs) and DMX (3
Terminal Block for DMX
connection), w/New Command Selection Firmware for setting fade speed for 16
DMX channels. 200 DMX Channels. The 30 inch TTL cable included. Special Command for
controlling DMX heads.
Links: Specification Sheet Schematic |
 |
|
C8-DMX-HCA-1
Price Each: $188.95 (USD) |
8 input (buttons), 16 Output (8 High Current Outputs), & DMX (3
Terminal Block for DMX connection), w/New Command Selection Firmware for setting DMX fade speed for
16 channels. 200 DMX Channels. The 30 inch TTL cable included. Special Command for
controlling DMX heads.
Links: Specification Sheet Schematic |
|
|
Price Each: $168.95 (USD) |
16 input (buttons), 24 Output (8 High Current Outputs). HCA
Daughter Board Included)
Links: Specification Sheet Schematic |
|
|
C8-HCA
Price Each: $163.95 (USD) |
8 input (buttons), 16 Outputs (8 medium current outputs & 8 High Current Outputs). HCA
Daughter board Included
Links: Specification Sheet Schematic |
C-16-HCA Board Shown |
|
RGBW High Current
Driver Board with 15 amperes drive capability each of the 4 color outputs
(or drive [12Volt DC] motors, Incandescent Lamps, Solenoids and more. This board comes with the above boards that have 'RGBW' in the part number. |
Red, Green, Blue,
and White Driver board for 12Volt Rope Lights (LED's), or motors, or
solenoids, 15 amps each
circuit!
The C8 and C16 boards (with or without DMX) have been designed to stack above this driver board. Requires High Current Power Supply! Links: Specifications Sheet Schematic |
|
|
HC-DRIVER-8 Output High Current Adapter Board
Price Each $88.95
|
Connect any HMS output port to this board to expand the
output current drive to 6 amps per output.
Links: Specification Sheet Schematic |
|
|
C-XX-HCA 8 output
'High Current' Daughter Board for C16/C8 boards
This Board comes with the above boards that have 'HCA' in the part number.
|
Daughter Board for C16 & C8 boards (Port3)
High Current drivers for 6 amps per output. Stacks under C16/C8. boards similar to RGBW board. Links: Specification Sheet Schematic |
|
ROKU-C-16-DMX-2 (XLR Connector for DMX)Price Each: $160.50 (USD) |
16 Inputs (buttons) and 16 Outputs w/Lamp Drivers + DMX512 Controller.
4 DMX channels with fade selection (fixed fade). XLR receptacle for
DMX, and Terminal Block for 12VDC Power.
External 12V Power required. 30 inch TTL cable included. Links: Schematic Specifications Sheet |
 Comes with .9 meter Stereo Cable for '5V TTL' serial port. |
ROKU-C-16-DMX-1 (Terminal Block for DMX)Price Each: $157.50 (USD) |
16 Inputs (buttons) and 16 Outputs w/Lamp Drivers + DMX512 Controller.
4 DMX channels with fade selection (fixed fade). Terminal Block for DMX
Connections and 2.1mm jack for 12VDC power.
External 12V Power required. 30 inch TTL cable included. Links: Schematic Specifications Sheet |
Comes with .9 meter Stereo Cable for '5V TTL' serial port. |
ROKU-C-8-DMXPrice Each: $155.00 (USD) |
8 Inputs (buttons) and 8 Outputs w/Lamp Drivers + DMX512 Controller.
4 DMX channels with fade selection (fixed fade)
External 12V Power required. 30 inch TTL cable included. Links: Schematic Specifications Sheet |
Click to view larger image (note: Roku-C-16-DMX shown) |
| ROKU-Serial-DMX
Price Each: $105 (USD) |
RS232 Interface W/8 Inputs (buttons) & 8 Outputs + DMX512 Controller
DMX512 is an Industry standard for utilizing 'Light Dimmer Packs' to control room lighting and more Links: Schematic Specifications Sheet Links: DB9 Cables About DMX Serial Example |
|
Roku-HD-485XPrice Each $95.50 |
DMX512 RECEIVER Interface board to Operate the Brightsign via a DMX512 controller. Address Selectable via Dip Switch Links: Schematic Specifications Sheet |
|
|
RS232-TTL
Port Adapter
Price Each: $65 (USD) |
RS232 to Roku BrightSign TTL Port Adapter. Reduce
development time for the more complex 'Command Structure' HMS Interface
boards. Work out the strings for controlling the RGBW and/or the
DMX512 interfaces using your computer! Use this board to use your computer to emulate the TTL port of the BrightSign or use your computer to monitor the TTL Port output of the BrightSign. Links: Schematic Specifications Sheet Links: Accessories & Power Supplies Terminal Program (on the web) |
|
|
RGBW-DMX
Kit (Everything needed for RGBW/DMX Development)
Price Each $259.95 ($296.00 Value) |
Kit Include: C-16-RBGW-DMX-1 board (includes RGBW Daughter Board), DB15-1 Cable, PS12V-3A-TB (3 amp power supply), TTL cable, RS232-TTL port adapter, DB9-10 Cable (for connection of RS232-TTL adapter to Computer. | (no picture of kit) |
|
BrightAuthor
Link http://forums.roku.com/viewtopic.php?f=19&t=31022
TTL Example: 'TTL_16.BRS' (Bright
Script) Serial Example 'DMX.CSV' |
||
Please inquire if you have a custom requirement for interfacing! Turn around can be a little as two weeks.
| Note: External Supply Voltage: An External Power Supply is needed to power the loads on the output connector. Do not connect any loads that have their own power that exceeds the power as applied to the board using the 'Ext. Power Connector'. Doing so may result in damage to the board. I.E. Suppose that 12 volts is supplied to this board and you have a relay board with it's own power of 24Volts DC that powers the relays. The 24VDC will feed back into the board via the foldback diodes. Note: Foldback diodes are required for inductive loads such as relays or small motors. Some boards have a terminal block and require power supplies with -TB in the part number (cut, stripped, tinned for terminal block). All others have 2.1mm power jack. |
Updated: November 2, 2011
