DB15 Boards (GPIO only) |
||||
| Item | GPIO (Buttons or Outputs) | Lamp Drivers | External Power Required | Enclosure |
| HD-GPIO (Development) 8 button switches + |
8 | 0 | N/A | EN-31-A |
| DB15-TB10-3V | 8 | 0 | N/A | Direct Connect |
| Sync Board | 4 | 4 | 12V 'If Lamp Loads' | Direct Connect |
| HD-4Opto-4R | 4 (Isolated Inputs) | 4 Relay Outputs (Isolated) | 12V, 2.1mm | EN-31-A |
| HD-4Opto | 4 (Isolated Inputs) | 0 | N/A | Direct Connect |
| HD-4x4R | 4 | 4 (Relay Outputs) | 12V | EN-31-A |
| Roku-HD-485 (DMX) | 4 | 4 | 12V, Terminal Block (If Lamp Loads) | EN-31-A |
| HD-Linx-Remote Controller | 8 Button Fob | 0 | N/A | Direct Connect |
| Roku-HD-4x4 | 4 | 4 | 12V, Terminal Block (If Lamp Loads) | EN-31-A |
DB15 (GPIO) +TTL Interface Boards (TTL is the 5V Serial Port on the BrightSign)Note: HD1020 requires the 'RS232-TTL Adapter' |
|||||
| Item | GPIO (Buttons or Outputs) | Buttons (TTL) | Lamp Drivers (TTL) | External Power Required |
Enclosure |
| HD-64x64 | 1 of 8 (Inputs 57-64) | 56 (1 of 56) | 64 (Limited) | 12V, 2.1mm | EN-42-A |
| Roku-C-16 | 8 | 8 | 16 | 12V, Terminal Block | EN-42-A |
| Roku-C-TTL-8x8 | 8 | 0 | 8 | 12V, Terminal Block | EN-42-A |
| Roku-C-TTL-8x16 | 8 | 0 | 16 | 12V, Terminal Block | EN-42-A |
DB15 + TTL Serial Port 'DMX Boards'Note: HD1020 requires the 'RS232-TTL Adapter' |
||||||
| Item | GPIO (Buttons or Outputs) | Buttons (TTL) | Lamp Drivers (TTL) | External Power Required |
HMS Protocol | Enclosure |
| Roku-C8-DMX | 8 | 0 | 8 | 12V, Terminal Block | No | EN-42-A |
| Roku-C16-DMX-1 | 8 | 8 | 16 | 12V, 2.1mm | No | EN-42-A |
| Roku-C16-DMX-2 | 8 | 8 | 16 | 12V, Terminal Block | No | EN-42-A |
| HMS-C8-DMX | 8 | 0 | 8 | 12V, 2.1mm | Yes (24 fade channels) | EN-42-A |
| HMS-C16-DMX | 8 | 8 | 16 | 12V, 2.1mm | Yes (24 fade channels) | EN-42-A |
DB15 + TTL Serial Port 'DMX + RGBW Boards' (HMS Protocol)Note: HD1020 requires the 'RS232-TTL Adapter' |
||||||
| Item | GPIO (Buttons or Outputs) | Buttons (TTL) | Lamp Driver Outputs (TTL Controlled) |
External Power Required |
HMS Protocol | Enclosure |
| C8-RGBW-DMX | 8 | 0 | 8 | 12V, 2.1mm | Yes | EN-42-A |
| C16-RGBW-DMX | 8 | 8 | 16 | 12V, 2.1mm | Yes | EN-42-A |
RS232 Serial Products |
||||
| Item | Buttons | Lamp Driver Outputs | External Power Required |
Enclosure |
| HD-RS232-TTL Adapter | 0 | 0 | N/A | N/A (Direct Mount) |
| BS-RS232-DMX | 0 | 0 | N/A | EN-31-A |
| ROKU-Serial-8x8 | 8 | 8 | 12V, Terminal Block | EN-31-A |
| ROKU-Serial-DMX | 8 | 8 | 12V, Terminal Block | EN-31-A |
| RS232-TTL Adapter | Converts a computer RS232 port to the BrightSign TTL port | 5V, 2.1mm | ||
Specialty Boards |
|||||
| Item | Buttons | Lamp Driver Outputs | External Power Required |
Enclosure |
|
| BS-SL-232_DMX | BrightSign Slave Control + DMX (RJ11 Phone Cable) | 8 (GPIO) | 0 | N/A | EN-31-A |
| Roku-HD-485X | DMX Controls the BrightSign | 0 | 0 | N/A | EN-31-A |
| Roku-C-RFID | Radio Frequency Identification (Controller), GPIO + TTL Port | N/A | EN-31-A | ||
| RFID-PAM | Radio Frequency Transmitter/Receiver (Hitag/1) | 8 | N/A | EN-31-A | |
| Roku-HD-Hybrid | RS232 + DB15 (GPIO) | 8 (GPIO) | 8 (RS232) | 12V, Terminal Block | EN-31-A |
| HC-Driver-8-6A (closeout) | 8 output, 6 amps per output 'expander board' for HMS boards with Lamp Drivers Circuits |
12V (High Current) |
|||
| HC-Driver-8 | 8 output, 15 amps per output 'expander board' for HMS boards with Lamp Drivers Circuits |
12V (High Current) |
|||
| HC-16-High Current Adapter | 8 output, 8 amps per output daughter board for C8 and C16 boards (HMS Protocol) |
12V, Terminal Block |
|||
| 8-Out-Ser 12V Lighting System | 1 to 120 high current Output Channels with PWM
(Brightness and Fade Settable for each channel) Note: 1 board required for each 8 channels. Uses the Roku 5 volt TTL Serial Port Connection |
12V (High Current) |
|||
| SCENE_CTRL | SCENE CONTROLLER: Synchronize '8-OUT-SER' boards for scenes |
12V, 2.1mm |
EN-31-A |
||
| HD-Linx-Remote | 418 or 433 MHz remote controller (all 8 GPIO's) |
N/A |
|||
| HC-16-High Current Adapter | High Current Adapter, 8 output, 8 amps per output, daughter board for HMS-C8 and HMS-C16 boards (HMS Protocol) |
12V, Terminal Block |
|||
Updated: May 2, 2012