|
|
|
|
ROKU Brightsign Audio Accessories |
||
Item |
Description |
Click Pictures for Larger Image |
| 10W x 10W Stereo Amplifier $19.95 |
Amazingly small Powerful amplifier.
Class D, 10 watt Stereo amplifier (10 watts each channel). 12 volts. 8 ohm speakers. Audio Input is 3.5mm (1/8"). Power Input 12 volts 2 amps (center = positive). |
 |
|
3.5mm Stereo Cable $3.75 |
.9m (36 inch) Stereo Cable (BrightSign to 10W Stereo Amplifier). Link: Typical Power Connections (future, please inquire) |
|
| 2.1mm Power Cable (Jack on one end) (cables listed below) | 2.1mm DC Power Connector w/cable for connection from any HMS board with V+ and 0V on the terminal block. Use to 'jumper' 12 volts to the amplifier. Be sure to use a 12Volt 3ampere power supply for both Audio and I/O boards. | |
|
PC-2.1-36 $2.94 |
36" Power Cable w/2.1mm Jack |
 |
| PC-2.1-72 $4.18 | 72" Power Cable w/2.1mm Jack | |
| 12 Volt Power Supply (3 amps) PS-12V-3A-TB Power Supply $44.50 |
Power Supply for both HMS I/O board and Stereo Amplifier
(shown above) 12Volt 3.0 amp regulated 'Table Top' power supply for loads (lamps, relays, motors, etc.) Note: (wires tinned and color coded) (Red = +Volts). AC cord provided. |
 Click on image for larger image |
| 12 Volt Power Supply (3 amps) PS-12V-3A Power Supply $42.50 |
Power Supply for both HMS I/O board and Stereo Amplifier
(shown above)
12Volt 3.0 amp regulated 'Table Top' power supply for loads (lamps, relays, motors, etc.) Note: With 2.1mm plug for connection to I/O boards with 2.1mm Jack. AC cord provided. |
Click on image for larger image |
| CH6520 BOSS Speaker Set $28.60 |
6-1/2 inch, 8 Ohm speaker suitable for the 10 watt amplifier shown
above Includes 6 feet wire for each speaker. Very suitable for kiosk use. Weight: ~ 4 lbs. |
 |
|
|
||
Updated: July 1, 2011