Goto BrightSign Interface Products Ordering Page

Goto HMS-Brightsign Home Page

HMS Home Logo

RFID 'Passive' Products

ISO15693 Protocol only!

DB15 and TB12 Boards (GPIO only) RFID Interface Boards

Link: About RFID (New to RFID, Please read this document!)

Item Description Features RFID Reader  
GPIO-S3-RFID

Price: $80.00 USD

Single Tag Event System

Phoenix Connector

Single Tag/Card Activation

8 Tag Values (1 OF 8), Single Tag event

Links: Specification Sheet

ALL 13mHZ Readers GPIO-RFID
GPIO-S3-RFID-MT

Price: $95.00 USD

Multiple Tag Event System.  Use with the HMS-150 or HMS-200 Antenna.  Note: Minimum tags on antenna = 2

Phoenix Connector

Maximum 8 Tag Tracker (Inventory)

 Up to 255 Tag Values, READ & WRITE TAGS
Special Firmware for reporting tags removed from the antenna.  Note: There always has to be 1 tag left on the antenna (see the specification sheet)

Links: Specification Sheet

All 13mHZ Readers GPIO-RFID
RFID-RW-R2   'Stand Alone Read/Write Board

Price: $80.00 USD

Tag Read/Write System Stand Alone Board (no BrightSign Interface)

255 Tag Values, READ & WRITE TAGS

Note: Order 5Volt Power Supply Separately

Links: Specification Sheet

13mHZ Reader Included

B06 Antenna Included

GPIO-RFID-RW-TB
GPIO-S3-RFID4  

Price: $140.00 USD

Single Tag Event, 1 to 4 RFID readers

'Series 3' GPIO Connector

Maximum 8 Tag Tracker (Inventory)

8 Tag Values

Links: Specification Sheet

All 13mHZ Readers GPIO4-RFID-TB (4 Reader)

Note: Shown w/out Terminal Block

Custom Charge
Customized Interface Select the appropriate amount as discussed on the phone and specify in the PayPal ordering window what the custom charge is for.  
Link: RJ12 Phone Cables Link: Power Supplies    

 

USB and Serial (S3-S4 Models) RFID Interface Boards

 Item Description    
USB-RFID-AL  

Price: $90.00 USD

 

USB RFID Single reader/Single Tag Interface.  Tags numbers 1 thru 255

Links:   Specification Sheet

Use with the RDM-880 readers shown below (in the next table).
USB-RFID-MT 

Price: $105.00 USD

 

USB RFID Single reader/Multi- Tag Interface.  Tags numbers 1 thru 255

Links:   Specification Sheet

Use with the RDM-880 readers shown below (in the next table).
USB-S3-RFID4  

Price: $130.00 USD

 

USB or Serial RFID Multiple reader Interface, Single tag event (Approach/Leave).  Tags numbers 1 thru 255

Links:   Specification Sheet

Use with the RDM-880 readers shown below (in the next table).
USB-S3-RFID4-MT 

Price: $150.00 USD

USB of Serial RFID Multi-Reader/Multi-Tag Interface.  Tags numbers 1 thru 255.  Monitor up to 16 tags simultaneously!

Links:   Specification Sheet

Up to 4 reader Interface

Use with the RDM-880 readers shown below (in the next table).

Link: RJ12 Cables Phone Cables RFID to RDM 880 Readers Link: Power Supplies  

 

RFID Readers w/Antenna ISO15693 (Updated 07/25/2018)

Link: About Antenna Mounting and Improving Reliability

Link: Antenna Shelf Design.PDF

Item

Description

Size/Info

 
RDM-880-ADPT (Link to Data Sheet) (Reader-Adapter Shown wthout Antenna)  
RDM-880-Bxx
Antenna Size
13.56mhz Reader

Select the Antenna Size

Shown with B06 antenna

2.2x2.9 inches

(55 x 73mm)

Use with Single Reader or 4 Reader Interfaces

HMS-880-B06 Rfid Reader
Bxx-Spacers
Antenna Spacer Size
Various Antenna Spacers .062 thick See 'Shelf Design' drawing for antenna mounting using MDF or Particle Board material (spacers not needed for plastic mounting)

 

HMS-880-B06 Rfid Reader

Shown with B06 Spacer

Link: RJ12 Cables Phone Cables RFID to RDM 880 Readers Link: Power Supplies  

Link: About RFID (New to RFID, Please read this document!)
Important information about the larger antenna!

HMS-B07 Antenna

Note: Shown for clarification

13.56mhz Antenna 2.4 x 3.2 inches 

Antenna for RDM880 Reader Module

(60 X 80mm)

HMS-880-57ANT RFID Reader
HMS-B08 Antenna

Note: Shown for clarification

13.56mhz Antenna 2.6 x 3.6 inches 

Antenna for RDM880 Reader Module

(65 X 90mm)

HMS-880-57ANT RFID Reader
HMS-B36 Antenna

Price: $30.00USD

Note: Connection wire included

13.56mhz Antenna 2.7 x 6.0 inches 

Custom Antenna for RDM880 Reader Module

(70 X 150mm)

HMS-880-57ANT RFID Reader
HMS-B38 Antenna

Price: $39.00USD

Note: Connection wire included

13.56mhz Antenna

Use Plastic or Glass Shelf

2.7 x 8.0 inches 

Custom Antenna for RDM880 Reader Module

(70 X 200mm)

HMS-880-57ANT RFID Reader
HMS-B410 Antenna

Price: $48.00USD

Note: Actual antenna may vary from the picture

13.56mhz Antenna

Use Plastic or Glass Shelf

Use 30mm tags or greater!

4.0 x 10 inches 

Custom Antenna for RDM880 Reader Module

(100 X 250mm)

HMS-ANT-200
HMS-B47 Custom Antenna

Price: $43.00USD

Note: Actual antenna may vary from the picture

13.56mhz Antenna

Use Plastic or Glass Shelf

Use 30mm tags or greater!

4.0 x 7.5 inches 

Custom Antenna for RDM880 Reader Module

(100 X 190mm)

HMS-ANT-200
HMS-B68 Custom Antenna

Price: $48.00USD

Note: Actual antenna my vary from the picture.

13.56mhz Antenna

Use Plastic or Glass Shelf

Use 30mm tags or greater!

6.0 x 8.6 inches 

Custom Antenna for RDM880 Reader Module

(150 X 220mm)

       

 

Hi-Power RFID Reader ISO15693 13.56mhz
--Required for Large Antenna--

This system intended for Inventory Tracking where the inventory items are stored on a shelf.

Item Description Size  
RS232-RFID-1W

Price: $407.00 USD

VHF Reader, 1Watt
Includes 12V Power Supply, RS232 Interface, Antenna, and DB15 cable (10 foot).

Link: Specification Sheet (In Progress 08/2016)

Approximately 4 x 4.75 x 1"
RS232-RFID Interface
Included with the RS232-RFID-1W Reader
Picture Shown for clarity. Connects Directly to the BrightSign. Approximately 2.75 x 1.3"

Note: DB9 RS232 Plug wired to Board

HMS-ANT-280

Included with the RS232-RFID-1W Reader

 

Picture shown for clarity.  Connects to the RFID reader with 50 ohm coax cable 280mm x 170mm

(11"x6.75")

 

RFID Tags  Blank RFID Tags 13.56mhz (you program)  RFID Tags
Round & Square Tags         

RFID-RW-R2   'Stand Alone Read/Write Board

Price: $80.00 USD

Tag Read/Write System Stand Alone Board (no BrightSign Interface)

255 Tag Values, READ & WRITE TAGS

Note: Order 5Volt Power Supply Separately

Links: Specification Sheet

GPIO-RFID-RW-TB
13mHZ Reader Included
B06 Antenna Included
Blank RFID-Tags
Size

Tag Notes:
1. 20 & 25 mm tags use with the smaller antenna (B08 or smaller)

2. 30 mm tags and larger can be used with any size antenna.

 

RFID Tags

RFID Accessories

Item

 

RFID-Tags-Btn
Size
Button Number
20mm & 25mm Tags

20mm tags have Limited Range.  Use with B08 and smaller Antenna

  30 mm and larger tags have the best range and work best with the Larger Antenna

RFID-Tags-Decimal
Size
Decimal Number

 

Note: Contact HMS with Custom  Decimal ID numbers for your tags
       
Note: Typical ID numbers for tags for GPIO are: 1, 2, 4, 8, 16, 32, 64 and 128.  These number represent Btn0 thru Btn7

Note: Tags can be ordered with any number (1 thru 255) Contact HMS with the Custom Decimal ID numbers for your tags

 

Revised: March 02, 2024